NMC-70VS

1. Adopt Taiwan HIWIN or PMI line rail, and the width of the Y and Z axis rails is up to 45mm; 2. The wide base supports the machine structure; 3. The double-layer arm structure of the force column increases the rigidity by 1.5 times; 4. The X-axis sliding seat has a super-large span, and the column uses a herringbone structure; 5. The three-axis adopts Taiwan's external diameter 40mm C3 grade screw rod, and the three-axis adopts NSK original bearing (3062), which is pre-tensioned to prevent thermal displacement; 6. High rigidity BT spindle, ring spray design; 7. The machine uses components from established manufacturers; ITEM NMC-70VS-Y2/4 NMC-70VSP-Y2/4 NMC-70VP Workable size(L*W)mm 1400*700/1500*700 1400*700/1500*700 1500*800 T-slot(No.-W×D)mm 5-18*145 5-18*150 5-18*152 Max. Worktable loading kg 1000 1200 1300 The dis. From Spindle center to Beam guideway mm 752 795 785 The plane dis. From spindle end to worktable mm 140-840 145-875 150-800 X/Y/Zaxis travellingmm 1300/700/700 1300/700/700 1300/700/700 1300/700/700 1300/700/650 X/Y/Zguideway type XYZ roller linear guide Two linear + one slide Three-axis hard rail X/Y/Zfast move speedm/min 20/24/36 24/24/24 12/12/12 Cutting feed speed rangemm/min 10000 10000 8000 X/Y/Zservo motor PowerkW 3/3/3 3/3/3 3/3/3 Spindle motor powerkW 11/15kW 11/15KW 15/18KW Max speed of spindler/min 8000 8000 8000 Tool magazine capacity/form 24 24 24 Shank form BT40 BT40 BT50 Max weight of toolkg 8 8 25 Max diameter/length of toolmm Ø80/250Neighbor knife Ø120No Neighbor Knife Ø80/250Neighbor knife Ø110/350No Neighbor Knife Ø110Neighbor knife Ø350No Neighbor Knife Exchange tool time(Tool to Tool) Sec 2.1 2.1 4 Exchange tool type Side-mounted mechanical arm Side-mounted mechanical arm Side-mounted mechanical arm X/Y/Zaxis position accuracy mm ±0.008 ±0.005 ±0.005 X/Y/Zaxis repeat position accuracymm ±0.006 ±0.003 ±0.003 Air pressure kg/cm 6-8 6-8 6-8 Electricity demand kVA 30 25 25 Machine size(L×W*H)mm 3729*2435*3020 3729*2435*3020 3729*2435*3020 Machine weightkg 9 9 13